NIR-DYG-xxx
Laser Eyewear, 582-600/950-1064 nm
Laser safety goggles according to EN 207 with a polycarbonate filter and a daylight transmittance of 15 %.
NIR-DYG-xxx
Laser safety goggles according to EN 207 with a polycarbonate filter and a daylight transmittance of 15 %.
UNV-IPL
Laser safety goggles according to EN 166 and DIN EN 175 with polycarbonate filter and an average daylight transmission of 2 and 16 %.
LMT-LS-10-12
Air-cooled safety shutter with a beam trap (beam dump) laser to 20 W optical power.
NIR-ZS1-xxx
Laser safety goggles according to EN 207 with a polycarbonate filter and a daylight transmittance of 34 %.
LMT-LEDS-Xray
Compact and maintenance-free LED warning light to hedge X-ray ranges.
NIR-RB2-xxx
Laser safety goggles according to EN 207 with a polycarbonate filter and a daylight transmittance of 35 %.
Laserjustierbrillen according to DIN EN 208 with polycarbonate filter and a daylight transmission of 29 %.
NIR-DIW-xxx
Laser safety goggles according to EN 207 with a polycarbonate filter and a daylight transmittance of 15 %.
Laser protection glasses according to DIN EN 208 with polycarbonate filter and a daylight transmission of 10 %.
LMT-LWL-2W
The LED warning lights to indicate status of security restricted areas or spaces are operated at low voltage. With its compact size, it can be well attached to the entrance area at eye level.
UNV-G2012-559G
Laser safety goggles according to DIN EN 207 with glass filter and a daylight transmission of 92 %.
LMT-LEDS-ULT
Large, space-saving LED laser warning light - in addition to the standard versions, custom icons, text and colors up to two different status are possible.
DAT-WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.