NIR-YPL-xxx
Laser Eyewear, 560-1500 nm
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 7 %.
NIR-YPL-xxx
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 7 %.
LMT-ICS-KP-12
NIR-ML1-xxx
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 45 %.
LMT-LWL-3W
The laser protection windows 750-1120 nm + 10600 nm made of acrylic, with a daylight transmission of 51 % protect with a filter thickness of approximately 3.2 mm.
NIR-ZS2-xxx
Laser protection glasses according to DIN EN 207 with polycarbonate filter and a daylight transmission of 19 %.
NIR-RA2-xxx
Laser protection glasses according to DIN EN 207 with polycarbonate filter and a daylight transmission of 40 %.
UNV-P1016-xxx
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 16 %.
LMT-ICS-1-DB
Distribution boxes for active insertion into a laser protection interlock system p>
LMT-ESTOP-BG
Emergency break switch, needeed for laser room protection (in this case with green glas)
NIR-ALX-xxx
Laser adjustment goggles according to DIN EN 208 with polycarbonate filter and a daylight transmission of 25 %.
DAT-WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.