EOP-CH-61-B
EOP-CH-61-B Optical Chopper with Blade
The VARIABLE FREQUENCY shutter / chopper Model EOP-CH-61-B consists of a blade (vane) mounted on a motor with a limited rotation angle
Optics & Optomechanics
EOP-SC-5
EOP-SC-5 Resonant optical scanner
These special fixed-frequency scanners are very compact, inexpensive and are particularly well suited for small devices and constructions in confined spaces
EOP-SC-10
EOP-SC-10 Resonant optical scanner
These special fixed-frequency scanners are very compact, inexpensive and are particularly well suited for small devices and constructions in confined spaces
EOP-SC-20
EOP-SC-20 Resonant optical scanner
These special fixed-frequency scanners are very compact, inexpensive and are particularly well suited for small devices and constructions in confined spaces
EOP-SC-21
EOP-SC-21 Resonant optical scanner
These special fixed-frequency scanners are very compact, inexpensive and are particularly well suited for small devices and constructions in confined spaces
EOP-SC-25
EOP-SC-25 Resonant optical scanner
These special fixed-frequency scanners are very compact, inexpensive and are particularly well suited for small devices and constructions in confined spaces
EOP-SC-30
EOP-SC-30 Resonant optical scanner
These special fixed-frequency scanners are very compact, inexpensive and are particularly well suited for small devices and constructions in confined spaces
EOP-SH-10
EOP-SH-10 Laser Safety Shutter Standard
Standard version: Shutter comes with two studs for mounting and allows horizontal and vertical mounting, 2 million cycles minimum
EOP-SH-10-B
EOP-SH-10-B Boxed Laser Safety Shutter
Boxed Laser Safety Shutter: Shutter is boxed with a 0.42“ dia through hole for laser light, allows horizontal and vertical mounting and can be mounted directly to an optical table, 2 million cycles minimum
Boxed Laser Safety Shutter: Shutter is boxed with a 0.42“ dia through hole for laser light, allows horizontal and vertical mounting and can be mounted directly to an optical table, 50 million cycles minimum
EOP-SH-10-L
EOP-SH-10-L Laser Safety Shutter Longlife
Longlife version: Shutter comes with two studs for mounting and allows horizontal and vertical mounting, 50 million cycles
EOP-SH-10-M
EOP-SH-10-M Laser Safety Shutter with Base Plate
Shutter with Base Plate: Shutter allows horizontal and vertical mounting and can be mounted directly to an optical table, 2 million cycles minimum
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
