Optics & Optomechanics

Optics & Optomechanics

Biophotonics
Infrared Imaging
Spectroscopy
Hyperspectral Imaging
Machine Vision
Fiber & Telecom
1


Achromatic Doublets

OSE-DLB

Acromatic doublets are cemented achromats consisting of two different lenses: Positive low dispersion crown glass and negative high dispersion flint glass.
Resonable Lenses

OSE-S-DLB

An economical achromat for general use, suitable for an optical system that does not require high surface quality imaging, such as a microscope or telescope objective.

NIR Achromatic Lenses

OSE-DL-PNIR

By combining two lenses with different wavelength dispersion and refractive index, the resulting component provides lower spherical aberration and chromatic aberration than a single spherical lens.
Back to top

Popular Products

laser2000_dataray_wincamd-lcm_usb3_beam_profiler_mws_3011_crop.png

DAT-WinCamD-LCM

This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.

dat-wincamd-fir-8-14hr.jpg

DAT-WinCamD-IRBB

The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.

Laser Beam Profiler WinCamD-QD-1550

DAT-WinCamD-QD-1550

This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
Laser beam profile measurements for industrial applications

DAT-ILMS

DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.