NIR-ML3-xxx
Laser Eyewear, 630-660/800-915nm
Laser protection glasses according to DIN EN 207 with polycarbonate filter and a daylight transmission of 16 %.
NIR-ML3-xxx
Laser protection glasses according to DIN EN 207 with polycarbonate filter and a daylight transmission of 16 %.
UNV-G3005-559G
Laser safety goggles according to DIN EN 207 with glass filter and a daylight transmission of 40 %.
NIR-DY3-xxx
Laser adjustment goggles according to DIN EN 208 with polycarbonate filter and a daylight transmission of 36 %.
UNV-P1009-xxx
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 38 %.
NIR-DYE-xxx
Laser adjustment goggles according to DIN EN 208 with polycarbonate filter and a daylight transmission of 15 %.
NIR-HYG-xxx
Laser protection glasses according to DIN EN 207 with polycarbonate filter and a daylight transmission of 23 %.
NIR-CT2-xxx
Laser adjustment goggles according to DIN EN 208 with polycarbonate filter and a daylight transmission of 11 %.
NIR-YGH-xxx
Laser protection glasses according to DIN EN 207 with polycarbonate filter and a daylight transmission of 21 %.
NIR-EC3-xxx
Laserschutzbrillen nach DIN EN 207 mit Polycarbonat-Filter und einer Tageslichttransmission von 93 %.
NIR-YG5-xxx
Laser protection glasses according to DIN EN 207 with polycarbonate filter and a daylight transmission of 55 %.
NIR-HOY-xxx
Laser protection glasses according to DIN EN 207 with polycarbonate filter and a daylight transmission of 41 %.
UNV-P1036-5X7
Laser protection glasses according to DIN EN 207 with polycarbonate filter and a daylight transmission of 40 %.
DAT-WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.