NIR-PWV-xxx
Laser Eyewear, 730-1100 nm
Laser protection glasses according to DIN EN 207 with polycarbonate filter and a daylight transmission of 13 %.
Laser Safety Goggles
Filters
Test standard
Test standard
Filter Material
Filter Material
1
NIR-Weld-View-7
Laser safety goggle for laser welding
Laser protection glasses for laser welding according to DIN EN 207.
UNV-Weld-Helmet
Laser welding helmet MASTR
Laser welding helmet, fully certified to laser safety and welding protection standards. The UNV-Weld-Helmet offers optimal laser protection for hand-held laser welding.
Delivery time: Immediately from stock 82234 Wessling
Laser protection glasses according to DIN EN 207 with polycarbonate filter and a daylight transmission of 20 %.
UNV-P1044-5X7
copy of Laser Safety Goggle, 190-535 nm, 765-1100 nm
Laser protection glasses according to DIN EN 207 with polycarbonate filter and a daylight transmission of 15 %.
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 75 %.
PRS-Weld-Helmet
Laser welding helmet MAXIMUS
Laser safety helmet for hand-held lasers and all welding applications with permanent laser protection and switchable automatic glare protection (ADF).
NIR-Weld-View-7-ND1
Laser safety goggle for laser welding
Laser protection goggle for laser welding according to DIN EN 207 with additional flip filter.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
