OSE-OFB-R
Optical Flats, Rectangle, BK7
These BK7 Optical Rectangle Flats are precision polished on one side for high accuracy and surface quality.
Optics and Optical Coatings
1
OSE-OFBP
Optical Flats, BK7, Polished
These BK7 Optical Flats are precision polished to high accuracy and surface quality on both sides.
OSE-S-OFB
Reasonable Optical Flats
These lower cost optical flats have minimal reduction in surface quality and are suitable for most applications.
OSE-S-OFBP
Reasonable Optical Flats, Polished
These lower cost optical flats have minimal reduction in surface quality and are suitable for most applications.
OSE-OFSQ-C
Optical Flats, Circle, SiO2
These SiO2 Optical Circle Flats are precision polished on one side and have high accuracy and surface quality.
OSE-OFSQ-S
Optical Flats, Square, SiO2
These SiO2 Optical Square Flats are precision polished on one side and have high accuracy and surface quality.
OSE-OFSQ-R
Optical Flats, Rectangle, SiO2
These SiO2 Optical Rectangle Flats are precision polished on one side for high accuracy and surface quality.
OSE-OFSQP
Optical Flats, SiO2, Polished
These SiO2 Optical Flats are precision polished to high accuracy and surface quality on both sides.
OSE-OFPXP-C
Optical Flats, PX, Circle
These PX optical flats are precision polished on both sides for high accuracy and surface quality.
OSE-OFPXP-S
Optical Flats, PX, Square
These PX optical flats are polished on both sides for high accuracy and surface quality.
OSE-OFPXP-R
Optical Flats, PX, Rectangle
These PX optical plates are polished on both sides for high accuracy and surface quality.
OSE-S-OPB
Reasonable Optical Flats, Polished
These lower cost optical flats have minimal reduction in surface quality and are suitable for most applications.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
