The knife-edge prism is polished on the sharp edges of the rectangular faces and has no chamfers on these edges.
Optics and Optical Coatings
1
OSE-LPB
Light Pipes, BK7
BK7 Light Pipe is an optical element for illuminating a uniform brightness distribution from a light with a non-uniform brightness distribution.
OSE-LPSQ
Light Pipes, SiO2
SiO2 Light pipe is an optical element for illuminating a uniform brightness distribution from a light with a non-uniform brightness distribution.
OSE-PBPQ-30L20-10
Pellin Broca Prism
Pellin-Broca prism is a scattering Brewster prism and is designed to emit in the direction perpendicular to the incident beam.
OSE-PPB
Penta Prisms
Penta prisms deflect an input beam 270 degrees regardless of the angle of incidence on the first face.
OSE-PRS
Prism Sheets
The prism plate is used when changing the incidence direction or scattering a light source that is directional, such as an optical device for the LCD TV.
OSE-RCCB
Hollow Retro-Reflectors
The hollow retroreflector is similar to the corner cube; it reflects the incident light back to its original source.
OSE-RPB
Right Angle Prisms, BK7
Rectangular prisms that are not coated can be used in various applications, such as total internal reflection of critical angles and wavelength dispersion.
OSE-RPSQ
Right Angle Prisms, SiO2
Rectangular prisms that are not coated can be used in various applications, such as total internal reflection critical angle and wavelength dispersion.
OSE-TCPA
Paraboloid Mirrors
A parabolic mirror is a curved mirror that converts diverging light from one point of the light source into parallel light.
OSE-TCEA
Ellipsoidal Mirror
In general, an ellipsoid has two focal points and the light that passes through one focal point also passes through the other focal point after being reflected from the elliptical surface. According to this principle, when a light source is directed to one focal point, it is possible to collect light in the other focal point.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
