OSE-PBSW
Broadband Polarizing Beamsplitters
Broadband Polarizing Beamsplitters provides wide band polarizing.
Optics and Optical Coatings
1
OSE-PBS
Polarizing Beamsplitters
Polarizing beamsplitters split a monochromatic beam entering at zero degree into p-polarization as transmitted and s-polarization as reflected radiation.
OSE-WPQW
Broadband Quartz Waveplates
λ/4-retarders convert linearly polarized beams to circular and circular to linear. λ/2-retarders convert polarization direction arbitrarily.
OSE-WPQG
Air Gap Type Waveplates
Two-part air-gap waveplates are suitable for use with high energy lasers.
OSE-WPQ
Quartz Waveplates
Quartz waveplates are zero-order retardation plates composed of pairs of optically contacted crystalline quartz plates mounted on aluminum frames.
OSE-DEQ
Quartz Depolarizers
Quartz depolarizers convert linearly polarized input beams to unpolarized beams and are used upstream and downstream of measurement devices that must avoid polarization.
OSE-WPM
Mica Waveplates
Mica waveplates are zero-order retardation plates designed for a wavelength of 550 nm and effective from 400 - 700 nm.
OSE-FRB
Fresnel Rhomb Waveplates
This optical retardation can be given without the wavelength dependence for all visible regions.
OSE-GTPB
Glan Thompson Prisms, α-BBO
They are special polarizers with minimal transmission loss. α-BBO crystal type, which can be used in the ultraviolet range.
OSE-GTPC
Glan Thompson Prisms, Calcite
These are special polarizers with minimal transmission loss. Calcite can be used in the visible to infrared range.
OSE-GLPB
Glan Laser Prisms, α-BBO
Glan laser polarizers are designed to provide increased laser damage threshold for high power lasers and high energy laser pulses. α-BBO crystal type usable in the ultraviolet region.
OSE-GLP2
Glan Laser Prisms, Calcite
Glan Laser Polarizers are designed to provide enhanced laser damage threshold for high power lasers and high energy laser pulses. Calcite can be used in the visible to infrared range.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
