Optics and Optical Coatings

Optics and Optical Coatings

1


Plano Concave Lens, AR [nm]: 750 - 1550, BK7

OSE-SLB-NIR2

These simple negative lenses alone form a virtual image of a distant object or a collimated light source. In combination with other optics they reduce the power of the system.
Plano Convex Lens, Uncoated, BK7

OSE-SLB-P

These simple plano-convex lenses have a flat surface on one side and a spherical surface on the other side. They are also very close to the shape that minimizes spherical aberration for infinite conjugate applications
Plano Convex Lens, AR [nm]: 400 - 700, BK7

OSE-SLB-PM

These simple plano-convex lenses have a flat surface on one side and a spherical surface on the other side. They are also very close to the shape that minimizes spherical aberration for infinite conjugate applications
Plano Convex Lens, AR [nm]: 633 - 1064, BK7

OSE-SLB-PIR1

These simple plano-convex lenses have a flat surface on one side and a spherical surface on the other side. They are also very close to the shape that minimizes spherical aberration for infinite conjugate applications
Plano Convex Lens, AR [nm]: 750 - 1550, BK7

OSE-SLB-PIR2

These simple plano-convex lenses have a flat surface on one side and a spherical surface on the other side. They are also very close to the shape that minimizes spherical aberration for infinite conjugate applications
Back to top

Popular Products

laser2000_dataray_wincamd-lcm_usb3_beam_profiler_mws_3011_crop.png

DAT-WinCamD-LCM

This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.

dat-wincamd-fir-8-14hr.jpg

DAT-WinCamD-IRBB

The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.

Laser Beam Profiler WinCamD-QD-1550

DAT-WinCamD-QD-1550

This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
Laser beam profile measurements for industrial applications

DAT-ILMS

DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.