OSE-OBB
Optical Baseplates, OSE-OBB
The OSE-OBB base plate has M2 threaded holes on a 10 x 10 mm grid.
Optomechanics
1
OSE-OBC-2
Optical Baseplates, OSE-OBC-2
The OSE-OBC-2 base plate has M4 threaded holes on a 25 x 25 mm grid.
OSE-OSDOTS
Overhead Table Shelf Systems
The OSE-OSDOTS series is used for mounting vibration generating devices above the laboratory bench. The height of the base plate can be easily adjusted.
QTX-U
UV-Sensor cards
UV and especially IR sensor cards are indispensable tools in every single laboratory. They are ideal for adjusting and visualizing invisible laser radiation.
QTX-Q-Stick
IR-Sensor-Rods
UV and especially IR sensor cards are indispensable tools in every single laboratory. They are ideal for adjusting and visualizing invisible laser radiation.
QTX-Q-AP
IR-Sensor cards with crosshairs
UV and especially IR sensor cards are indispensable tools in every single laboratory. They are ideal for adjusting and visualizing invisible laser radiation.
UV and especially IR sensor cards are indispensable tools in every single laboratory. They are ideal for adjusting and visualizing invisible laser radiation.
QTX-Q-IRSCR
Coated glasses
UV and especially IR sensor cards are indispensable tools in every single laboratory. They are ideal for adjusting and visualizing invisible laser radiation.
QTX-ADQ-3/4
Self-adhesive foils 0.75'' x 0.75''
UV and especially IR sensor cards are indispensable tools in every single laboratory. They are ideal for adjusting and visualizing invisible laser radiation.
QTX-ADQ-22
Self-adhesive foils 2'' x 2''
UV and especially IR sensor cards are indispensable tools in every single laboratory. They are ideal for adjusting and visualizing invisible laser radiation.
QTX-ADQ-44
Self-adhesive foils 4'' x 4''
UV and especially IR sensor cards are indispensable tools in every single laboratory. They are ideal for adjusting and visualizing invisible laser radiation.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
