Filters
1
Beam Splitters


Hybrid Cube Half Mirrors

OSE-HBCH

Low polarization cube half mirrors can be used for broadband visible and infrared light. The hybrid coating is a special combination of metallic and dielectric multilayers resulting in a low polarizing and broadband coating.
Chromium Cube Half Mirrors

OSE-CSCH

Chromium cube half mirrors consist of two rectangular prisms. One of them is coated with chromium on the hypotenuse surface.
Dielectric Cube Half Mirrors

OSE-CSMH

Dielectric cube half mirrors consist of two right-angled prisms. One of them is coated with a dielectric multilayer partial reflection layer on the hypotenuse surface.
Broadband Dielectric Half Mirrors

OSE-PSMH

These half mirrors have 3 types of ultra-wideband optics for ranges from visibile to NIR, which are used for optical communication applications.
Thin Plate Beamsplitter

OSE-MPSMH

These thin beam splitters can be inserted into an optical light path without beam shift or chromatic dispersion for any light transmission application.
Chromium Plate Half Mirrors

OSE-PSCH

Chrome plate half mirrors are plate beamsplitters coated with chrome on the front side of optical parallels or wedge-shaped substrates.
Dielectric Cube Beamsplitters, 1:2

OSE-CSM33

Cube beamsplitter with dielectric multilayer coating on the hypotenuse face of a 45° angle prism. Reflectance : Transmittance: 1:2
Dielectric Cube Beamsplitters, 1:3

OSE-CSM25

Cube beamsplitter with dielectric multilayer coating on the hypotenuse face of a 45° right-angle prism. Reflectance : Transmittance: 1:3
Dielectric Plate Beamsplitters, 1:3

OSE-PSM25

Plate-shaped beamsplitters are dielectric multilayer coatings on a parallel plate or wedge-shaped substrate. Reflectance : Transmittance: 1:3
Variable Beamsplitter

OSE-VBS

A variable beam splitter can be used to change the angle of incidence of a laser.
Back to top

Popular Products

laser2000_dataray_wincamd-lcm_usb3_beam_profiler_mws_3011_crop.png

DAT-WinCamD-LCM

This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.

dat-wincamd-fir-8-14hr.jpg

DAT-WinCamD-IRBB

The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.

Laser Beam Profiler WinCamD-QD-1550

DAT-WinCamD-QD-1550

This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
Laser beam profile measurements for industrial applications

DAT-ILMS

DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.