OSE-NYTL
YAG Laser Focusing Lenses, Triplets
YAG laser focusing lenses are air-bearing triplets for YAG wavelengths.
Filters
!shop!_Type
1
OSE-HFTLSQ
Focusing Lenses for Fiber Lasers, Triplets
High power multi-element focusing lenses. Triplet Lenses.
OSE-PG
Protective Windows
Protective windows can be attached to the focusing lens to minimize damage from laser processing.
OSE-ETL
Excimer Laser Focusing Triplets
These objectives, 22 mm in length, are manufactured with a synthetic fused silica material and have a high transmission value in the ultraviolet wavelength range of 180 - 400 nm.
These reflective microscope objectives are optimized for chromatic aberration over a bandwidth of 350 nm to 7 µm.
With their long acting infinity correction function, these objectives can be used for a laser system and coaxial observation.
With these objectives, the user can focus a visible laser or microscopic observation of objects from a distance.
OSE-PFL
UV Objective Lenses
With its long working distance and field curvature correction, a natural observation image is achieved to the periphery of the field of view.
OSE-PAL-NUV
NUV Objective Lenses
With its long working infinity correction function, this objective can be used for a laser system and coaxial observation. It is also used for near UV light observation.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
