BWT-FRP
Fiber Optic Reflectance Probe
Fiber optic reflection probe consisting of a bundle of 7 optical fibers in a stainless steel ferrule
1
BWT-TFA
Trifurcated Fiber Optic Bundle
The TFA trifurcated fiber optic bundle series combines optical fibers at a common end with the fiber optic bundle trifurcated into three separate channels, terminated with standard SMA 905 connectors.
BWT-BFA/BRS
Bifurcated Fiber Optic Bundles
Bifurcated Fiber Optic Bundles out of fused silica with core diameters of either 200µm or 400µm.
Round-to-Slit fiber bundle for much higher throughput, sensitivity and signal to noise.
Adjustable cuvette sample holder from B&W Tek for manual adjustment of the path length through the sample
BWT-BCH100A/BCH103A
Cuvette Holder
2 & 3 Port Cuvette Holders from B&W Tek for standard cuvettes (12,5 x 12,5 mm)
BWT-FRPH
Fiber Reflectance Probe Holder
Fiber Reflectance probe Holder from B&'W Tek for manual positioning of the fiber to sample distance
BWT-BIP2.0
Fiber Optic Collimating Lenses
Compact, fiber-coupled Ulbricht Kugle with integrated, long-life 20 W halogen lamp Light source from B&W Tek for the spectral range from 350 nm to > 2600nm.
BWT-BIS1.5A
Integrating Sphere
Compact fiber-coupled integrating sphere from B&W Tek for the range of 250 nm - 2500 nm.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
