Lab and production measurement technology

Lab and production measurement technology

1


High-Speed Polarization State Generator - PolaPal™

GPC-PSG-001

GPCs' high-speed polarization state generator (PSG) module provides the ability to generate 6 states of polarization (-45°, 0°, 45°, 90°, RHC & LHC) across the Poincaré Sphere in less than 250 ?s, with an impressive repeatability of less than 0.1 degrees.
Dynamic Polarization Controller with Miniature Piezo Driver Card

GPC-PCD-M02

This module integrates a General Photonics all-fiber dynamic polarization controller with miniature piezo driver card, so that the SOP of the signal can be directly controlled either by a 0-5V analog control signal or a 12-bit TTL digital control signal. Because there is an on-board HV DC/DC converter, no external high voltage power supply is required.
Fiber Phase Shifter

GPC-FPS-003

The FPS-003 all fiber phase shifter/modulator combines a wide modulation bandwidth (up to 60 kHz) with low half-wave voltages to create a long-range device that can be driven by standard function generators.
Optical Coherence Domain Reflectometer - InsideView™ OCDR-1000

GPC-OCDR-1000

InsideView(TM) is an optical coherence domain reflectometer (OCDR- 1000) designed to obtain space-resolved reflection information inside a fiber optical component, such as a Photonic Integrated Circuit (PIC), for diagnosing quality or design issues.

sei-ferrulepro.jpg

SEI-FerrulePro-SPR-1

FerrulePro is the worlds first fully automated desktop fiber connector cleaner for cable assembly production environments and laboratory.
sei-ferrulepro.jpg

SEI-FerrulePro-SPR-2

FerrulePro SPR-1 has been well received as the World's Exclusive Benchtop Fiber Cleaner since its launch in 2010. Now, the upgraded SPR-2 model which achieves cost reduction and high speed cleaning is newly released.
OEM Balanced Detector

GPC-BPD-003

OCT- und Sensorsysteme erfordern hochleistungsfähige ausgewogenePhotodetektoren, um das Signal-Rausch-Verhältnis des Systems zu verbessern. Die BPD-003 wurde speziell für OEM-Anwendungen in solchen Bereichen entwickelt, die auf niedrige Kosten und geringe Größe sowie hohe Leistung ausgelegt sind.
PMD and PDL Calibration Standards

GPC-CS-DGD/PDL/SOPMD

PMD and PDL are important considerations in many applications, especially high data-rate communications. With the development of high precision test equipment and tighter-tolerance systems, a need has arisen for extremely precise calibration standards.
Amonics 1550nm Continuous Wave Amplifier

AMN-AEDFA-CW-1550nm

These standard EDFAs feature high output power, high gain with very low noise, and they can be customized to accommodate a wide range of input signal levels. Customized version are available on request.

Back to top

Popular Products

laser2000_dataray_wincamd-lcm_usb3_beam_profiler_mws_3011_crop.png

DAT-WinCamD-LCM

This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.

dat-wincamd-fir-8-14hr.jpg

DAT-WinCamD-IRBB

The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.

Laser Beam Profiler WinCamD-QD-1550

DAT-WinCamD-QD-1550

This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
Laser beam profile measurements for industrial applications

DAT-ILMS

DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.