Applications

Applications

1


GEE-GES LED-Spotlight

GEE-GES

Lighting of medium and large areas, internal illumination of industrial machines and installations. Genesi illuminator for vision systems with cameras.
GEE-GEST LED-Ringlight

GEE-GEST

Direct ring light with continuous or strobe driving. GEST illuminator for vision systems with cameras. Available outer diameters from: 42 to 122 mm.
GEE-GH LED-Backlight

GEE-GH

Genesi backlight panels for cameras and diffused light illuminators, continuous or strobe use, standard and custom dimensions.
GEE-GERE LED-Backlight

GEE-GERE

Genesi backlight panels for cameras and diffused light illuminators, continuous or strobe use, standard and custom dimensions. Also available with three RGB channels.
GEE-GERE FLAT DOME LED-Domelight

GEE-GERE-FLAT-DOME

Genesi lighting panels for cameras and diffused light illuminators, continuous or strobe use, standard and custom dimensions
OEM Mini Raman development Platform

BWT-OEM Raman

The BTR115 series OEM Raman development platform from B&W Tek consists of an integrated Raman core engine with a stabilized laser, cooled CCD-based spectrometer and sampling optics.
Network & Service Companion

FLK-LIQ-100

Cable tests you can trust. Network tests you need. Measure network capacity up to 10 Gig via frequency-based measurements with the new LinkIQ from Fluke Networks.

Back to top

Popular Products

laser2000_dataray_wincamd-lcm_usb3_beam_profiler_mws_3011_crop.png

DAT-WinCamD-LCM

This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.

dat-wincamd-fir-8-14hr.jpg

DAT-WinCamD-IRBB

The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.

Laser Beam Profiler WinCamD-QD-1550

DAT-WinCamD-QD-1550

This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
Laser beam profile measurements for industrial applications

DAT-ILMS

DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.