Applications

Applications

1


Short Pass Filters, OSE-SHPF

OSE-SHPF

Filters are designed to divide sharply the wavelength color by transmitting the short wavelength and cutting off the long wavelength.
Longpass Filters, OSE-LOPF

OSE-LOPF

Filters are designed to divide sharply the wavelength color by transmitting the short wavelength and cutting off the long wavelength.
Sharp Cut Dichroic Mirrors

OSE-SDM

Divides sharply the color of wavelength by reflecting the short wavelength and transmitting the long wavelength.
High Parallism Aluminium Mirror, BK7

OSE-OPBA

This is a vapor-deposited aluminum flat mirror in which the substrate has been polished to a high degree of accuracy and is designed for high reflectivity at any angle of incidence.

Silver Flat Mirror

OSE-TFAG

Silver (Ag) coated mirrors have a high reflectance over a wide range from visible to infrared wavelengths.

Plano Convex Lens, Uncoated, BK7

OSE-SLB-P

These simple plano-convex lenses have a flat surface on one side and a spherical surface on the other side. They are also very close to the shape that minimizes spherical aberration for infinite conjugate applications
Plano Convex Lens, AR [nm]: 750 - 1550, BK7

OSE-SLB-PIR2

These simple plano-convex lenses have a flat surface on one side and a spherical surface on the other side. They are also very close to the shape that minimizes spherical aberration for infinite conjugate applications
Back to top

Popular Products

laser2000_dataray_wincamd-lcm_usb3_beam_profiler_mws_3011_crop.png

DAT-WinCamD-LCM

This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.

dat-wincamd-fir-8-14hr.jpg

DAT-WinCamD-IRBB

The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.

Laser Beam Profiler WinCamD-QD-1550

DAT-WinCamD-QD-1550

This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
Laser beam profile measurements for industrial applications

DAT-ILMS

DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.