NIR-AXX-xxx
Laser Eyewear, 720-830 nm
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 33 %.
NIR-AXX-xxx
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 33 %.
UNV-G2006-616
Laser safety goggles for patients according to DIN EN 207 with glass filter and a daylight transmission of 14%.
LMT-ERB
Laser blinds and laser protective visors are designed as passive protection systems to prevent the leakage of laser beams.
Laser safety goggles according to DIN EN 207 with glass filter and a daylight transmission of 40 %.
UNV-P1020-xxx
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 11 %.
UNV-P1025-xxx
Laser adjustment goggles according to DIN EN 208 with polycarbonate filter and a daylight transmission of 45 %.
NIR-ARG-xxx
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 48 %.
UNV-G2005-xxx
DIN standard certified laser safety goggles with ergonomic brackets for all laser wavelengths commonly used in telecom and a daylight transmission of 62 %.
NIR-DI4-xxx
Laser adjustment goggles according to DIN EN 208 with polycarbonate filter and a daylight transmission of 12 %.
UNV-P1018-xxx
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 32 %.
UNV-P1001-xxx
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 90 %.
UNV-P1022-xxx
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 10 %.
DAT-WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
DAT-M2DU
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.