OSE-BLF
Blue Filters
A filter that transmits a specific wavelength at green from blu, and cuts off other wavelengths in the visible range.
Optics & Optomechanics
OSE-GRF
Green Filters
A filter that transmits a specific wavelength at green from blu, and cuts off other wavelengths in the visible range.
OSE-HAF
Heat Absorbing Filters
This product is widely used for absorbing heat from halogen and xenon lights for experiments that need to avoid UV or heat from those lightings.
OSE-CCF-ECM
Color Correction Filters
The filter can simulate the sensing of a human eye which is similar the silicon pixel detector sensor with a wavelength located at a peak at the NIR range.
OSE-CLDF-50S
Cold Filter, 400 - 600 nm
- Part number: OSE-CLDF-50S
OSE-CLDM
Cold Mirrors
The principle of the cold mirror is reflecting the visible range light and leave the UV range light to transmit.
OSE-NHOTM
UV Filters, OSE-NHOTM
Dichroic filter transmit only visible light and reject ultraviolet and infrared light.
OSE-SHPF
Short Pass Filters, OSE-SHPF
Filters are designed to divide sharply the wavelength color by transmitting the short wavelength and cutting off the long wavelength.
OSE-LOPF
Longpass Filters, OSE-LOPF
Filters are designed to divide sharply the wavelength color by transmitting the short wavelength and cutting off the long wavelength.
OSE-RSF
Raman Longpass Filters
It is available to cut the excitation laser beam and extracted with high transmittance Raman shifted light on the longer wavelength side with a sharp rise.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
DAT-M2DU
M2 Option for WinCamD
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
