OSE-GYPC
Glan Taylr Prisms, Calcite
Transmission loss is minimal, and a high extinction ratio below5x10^-5 is claimed. Calcite can be used in the visible to infrared range.
Optics & Optomechanics
OSE-WPPC
Wollaston, Calcite
These are prisms for splitting the incident beam into two linearly polarized beams with orthogonal polarization direction. Calcite can be used in the visible to the infrared range.
OSE-RSPCQ-10
Roshon Polarizing Prism, Quartz
The polarizer separates the incident light into two linearly polarized light beams that cross perpendicularly.
OSE-RSPMF-10
Roshon Polarizing Prism, MgF2
The polarizer separates the incident light into two linearly polarized lights that cross perpendicularly.
OSE-SPF
Sheet Polarizers, 400 - 700 nm
By using a dichroic dye sheet, good linear polarization can be achieved over a wide range.
OSE-NSPFU-30C
Sheet Polarizer, 320 - 400 nm
By using a dichroic dye sheet, good linear polarization can be achieved over a wide range.
OSE-SPFN-30C-26
Sheet Polarizer, 760 - 2000 nm
By using dichroic dye film, good linear polarization can be achieved in a wide range.
OSE-WGPF-30C
Wire Grid Polarizing Filter
Only linearly polarized light oscillating in the direction of the metal frame mark is transmitted
OSE-PLC
Polarcor Polarizers
Polarcor is a polarizer made of glass. It offers a high extinction ratio in the infrared range.
These substrates are mainly used as the primary mirror in a reflecting telescope or as reflection mirror of a collimating optical system light-source.
OSE-TCAN
Aluminium Concave Mirror, Al, BK7
These substrates are mainly used as the primary mirror in a reflecting telescope or as reflection mirror of a collimating optical system light-source.
The cylindrical plano-concave lens has a concave curvature in vertical direction and no curvature in horizontal direction. In combination with a plano-convex cylindrical lens, an elliptically shaped beam can be formed into a circular beam for use in semiconductor and other laser applications.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
DAT-M2DU
M2 Option for WinCamD
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
