Fiber Optics

Fiber Optics



Drop-in Polarization Controller - PolaRITE™

GPC-PLC-003/006

This is the in-line version of the PolaRITE polarization controller. It can be inserted into a fiber optic system to control the polarization state of light without having to disconnect any part of the system.
High Speed Multifunction Polarization Controller— PolaMight™

GPC-MPC-203

The MPC-203 is a special version of GPCs’ Multifunction Polarization Controller which can reach extremely high rates of polarization change. It combines PolaRite™ II/III polarization controller with proprietary polarization control algorithms to achieve a wide range of polarization control functionalities.
Fiber Stretcher

GPC-FST-001

The FST-001-B is a piezo-driven fiber stretcher with a long optical delay range of up to 3 mm. The device comes complete with a piezo driver packaged in a user-friendly small enclosure.
Fiber Phase Shifter

GPC-FPS-002

GPCs’ 2nd generation all fiber phase shifter/modulator provides phase shifts up to 65π with a much lower half-wave voltage (~2 volts as compared with 10-20 volts for the 1st generation phase shifter) at frequencies from DC to 20 kHz
Fiber Phase Shifter

GPC-FPS-003

The FPS-003 all fiber phase shifter/modulator combines a wide modulation bandwidth (up to 60 kHz) with low half-wave voltages to create a long-range device that can be driven by standard function generators.
Balanced Photodetector

GPC-BPD-002

OCT and sensor systems require high performance balanced photodetectors to increase system signal to noise ratio. The BPD-002 is specially designed for use in research and development, with ease of use and high performance as the primary design goals.
Polarization Diverse Balanced Photodetector

GPC-PBPD-001

OCT and sensor systems require high performance balanced photodetectors to increase system signal to noise ratio. Polarization sensitive OCT and similar applications require separate analysis of the two polarization components of a signal. The PBPD-001 is specially designed for use in such systems.
Polarization Diversity Detector

GPC-PDD-001

Simultaneously detecting the powers of two orthogonal polarization components is important for many sensor and measurement applications. A pigtailed polarization beam splitter coupled with two photodetectors can be used for such applications; however, this arrangement is bulky, troublesome to handle, and costly.
Miniature Polarization Diversity Detector

GPC-PDD-003

Simultaneously detecting the powers of two orthogonal polarization components is important for many sensor and measurement systems, to either obtain polarization related information or minimize polarization sensitivity.
Fiber Pigtailed Free Space Interferometer

GPC-MZI-001

The MZI-001 is a fiber pigtailed compact Mach-Zehnder interferometer, based on freespace optics, for detecting changes in optical frequency. The device comes with two fast photodetectors for the balanced detection of the two complementary outputs of the interferometer.
Fiber Optic Depolarizer - PolaZero™

GPC-DEP

This patented device comes in a package as small as 85 × 60 × 10 mm for lasers with coherence lengths less than 10 meters. Devices for coherence lengths in the kilometer range can be custom made in a larger package, with nominal customization fees.
Back to top

Popular Products

laser2000_dataray_wincamd-lcm_usb3_beam_profiler_mws_3011_crop.png

DAT-WinCamD-LCM

This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.

dat-wincamd-fir-8-14hr.jpg

DAT-WinCamD-IRBB

The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.

Laser Beam Profiler WinCamD-QD-1550

DAT-WinCamD-QD-1550

This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
Laser beam profile measurements for industrial applications

DAT-ILMS

DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.

dat-wincamd-m2_pfad.jpg

DAT-M2DU

A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.