OSE-HAF
Heat Absorbing Filters
This product is widely used for absorbing heat from halogen and xenon lights for experiments that need to avoid UV or heat from those lightings.
Filters
Filters
!shop!_Type
!shop!_Wavelength Range in nm
!shop!_Wavelength Range in nm
OSE-CCF-ECM
Color Correction Filters
The filter can simulate the sensing of a human eye which is similar the silicon pixel detector sensor with a wavelength located at a peak at the NIR range.
OSE-CLDF-50S
Cold Filter, 400 - 600 nm
- Part number: OSE-CLDF-50S
OSE-CLDM
Cold Mirrors
The principle of the cold mirror is reflecting the visible range light and leave the UV range light to transmit.
OSE-NHOTM
UV Filters, OSE-NHOTM
Dichroic filter transmit only visible light and reject ultraviolet and infrared light.
OSE-SHPF
Short Pass Filters, OSE-SHPF
Filters are designed to divide sharply the wavelength color by transmitting the short wavelength and cutting off the long wavelength.
OSE-LOPF
Longpass Filters, OSE-LOPF
Filters are designed to divide sharply the wavelength color by transmitting the short wavelength and cutting off the long wavelength.
OSE-RSF
Raman Longpass Filters
It is available to cut the excitation laser beam and extracted with high transmittance Raman shifted light on the longer wavelength side with a sharp rise.
OSE-SDM
Sharp Cut Dichroic Mirrors
Divides sharply the color of wavelength by reflecting the short wavelength and transmitting the long wavelength.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
DAT-M2DU
M2 Option for WinCamD
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
