OSE-OBB
Optical Baseplates, OSE-OBB
The OSE-OBB base plate has M2 threaded holes on a 10 x 10 mm grid.
Optomechanics
OSE-OBC-2
Optical Baseplates, OSE-OBC-2
The OSE-OBC-2 base plate has M4 threaded holes on a 25 x 25 mm grid.
OSE-OSDOTS
Overhead Table Shelf Systems
The OSE-OSDOTS series is used for mounting vibration generating devices above the laboratory bench. The height of the base plate can be easily adjusted.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
DAT-M2DU
M2 Option for WinCamD
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
