OSE-PSM25
Dielectric Plate Beamsplitters, 1:3
Plate-shaped beamsplitters are dielectric multilayer coatings on a parallel plate or wedge-shaped substrate. Reflectance : Transmittance: 1:3
Filters
!shop!_Type
!shop!_Type
!shop!_Material
!shop!_Material
OSE-VBS
Variable Beamsplitter
A variable beam splitter can be used to change the angle of incidence of a laser.
OSE-YHS
Harmonic Separators
Harmonic separators are used to separate certain YAG harmonics from other harmonics.
OSE-BS4
Beam Samplers
A beam sampler behaves like a plate beam splitter, it has the ability to reflect approximately 5.2% of the total beam.
OSE-PDBS
Polka Dot Beamsplitters
The Polka Dot beam splitter has an aluminum coating of grid dots (polka dots) on the glass substrate.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
DAT-M2DU
M2 Option for WinCamD
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
