OSE-OFPXP-R
Optical Flats, PX, Rectangle
These PX optical plates are polished on both sides for high accuracy and surface quality.
Filters
!shop!_Type
!shop!_Type
!shop!_Coating
OSE-S-OPB
Reasonable Optical Flats, Polished
These lower cost optical flats have minimal reduction in surface quality and are suitable for most applications.
These lower cost optical flats have minimal reduction in surface quality and are suitable for most applications.
OSE-OPFL
Float Glass
Float Glass is a glass substrate produced by the float process used in the manufacture of window glass.
These Optical Parallels are precision substrates polished on both sides with excellent surface quality and flatness. Material: SiO2 for excimer lasers.
OSE-WSB
Wedged Substrates, BK7
These wedged substrates can separate the reflected beam through the front and back surfaces of the substrates by the slight wedge angle. Material: BK7.
OSE-WSSQ
Wedged Substrates, SiO2
These wedged substrates can separate the reflected beam through the front and back surface of the substrates by the slight wedge angle. Material: SiO2.
These wedged substrates can separate the reflected beam through the front and back surface of the substrates by the slight wedge angle. Material: SiO2 for excimer laser.
OSE-HMPQP
Optical Flats, SiO2
These are high precision polished substrates where the material change due to the temperature variation is very small. Material: SiO2.
OSE-HMPZP
Optical Flats, Low-Expansion glass
These are high precision polished substrates where the material change due to temperature variation is very small. Material: glass with low expansion.
OSE-WSQNAHP
Windows with AR-Coating for High Power Laser
Anti-reflective coated windows for high power lasers.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
DAT-M2DU
M2 Option for WinCamD
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
